This penetrometer is mainly used for soil investigation in place. The penetration rod is pressed in the soil by hydraulic pump, driver by Gasoline Engine.
SPECIFICATION
| TYPE | DESCRIPTION | QTY |
|---|---|---|
| ST - 151A | Hydraulic dutch cone penetrometer 2.5 Ton Capacity. Consist of steel pipe frame, cylinder piston, hand hydraulic valve, complete with two wheels for mobile activity | 1 Unit |
| ST - 152 | Hydraulic pump driver by gasoline engine with mobile frame | 1 Unit |
| ST - 142B | Sounding Rod. ST-60 machined steel, 500 mm in length, normal thread | 40 Pcs |
| ST - 143B | Plunger Rod. Round bar ST-60 machined steel, 15 mm diameter, 500 mm in length | 40 Pcs |
| ST - 155A | Push Adaptor. Machined steel | 1 Pc |
| ST - 155B | Pull Adaptor. Machined steel | 1 Pc |
| ST - 145C | Spiral Anchor. ST-60 Machined steel, 1.25 m in length, 230 mm anchor diameter | 4 Pcs |
| ST - 146A | Dutch cone T-piece. Machined steel pipe, painted | 1 Pc |
| ST - 147A | Mantle cone. ST-60 precision machined steel, hardened tip, normal thread | 1 Pc |
| ST - 147B | Friction Cone. ST-60 precision machined steel, hardened tip with friction jacket, tappered thread 60° angle, 37.5 mm diameter | 1 Pc |
| ST - 148 | Wrenches Set. Steel box case, consist of : pipe wrench 18” (1 pc), adjustable wrench 10” (1 pc), piston wrench (1 pc), anchor spanner (1 pc), spanner wrench (1 pc), oil seal (2 pcs), allen key 8” (1 pc), allen key 12” (1 pc), screw driver (1 pc), steel brush (1 pc), hydraulic oil (1 bottle), oil can 1 (pc), seal tape (2 pcs), gasoline engine standard tool kit (1 set) | 1 Set |
| ST - 109B | Turning Rod. Machined steel pipe, 1 1⁄4” dia, 800 mm in length | 2 Pcs |
| ST - 149C | Long Fasten Press. Square steel pipe, 1,500 mm in length | 2 Pcs |
| ST - 149D | Short Fasten Press. Square steel pipe, 1,200 mm in length | 2 Pcs |
| ST - 150 | Anchor Base. Machined steel, painted | 4 Pcs |
| GT - 472 | Manometer. 0 - 60 kg/cm2 capacity | 1 Pc |
| GT - 475 | Manometer. 0 - 250 kg/cm2 capacity | 1 Pc |
